Cisco GLC-ZX-SMD= 1000BASE-ZX SFP Transceiver Module, SMF 1550nm, DOM Max 70Km

Cisco GLC-ZX-SMD= 1000BASE-ZX SFP Transceiver Module, SMF 1550nm, DOM Max 70-80Km
 
Product Specifications
Cabling and Connectors
Connectors include the following:
● Dual LC/PC connector (1000BASE-SX, 1000BASE-LX/LH, 1000BASE-EX and 1000BASE-ZX)
● Single LC/PC connector (1000BASE-BX-D and 1000BASE-BX-U)
● RJ-45 connector (1000BASE-T)
Note: Only connections with patch cords with PC or UPC connectors are supported. Patch cords with APC connectors are not supported. All cables and cable assemblies used must be compliant with the standards specified in the standards section.
Table 1 provides cabling specifications for the SFPs that you install in the Gigabit Ethernet port. Note that all SFP ports have LC-type connectors, and the minimum cable distance for all SFPs listed (multimode and single-mode fiber) is 6.5 feet (2 m).
Table 1. SFP Port Cabling Specifications
Product
Wavelength (nm)
Fiber Type
Core Size (μm)
Modal Bandwidth (MHz* Km)***
Operating Distance (m)
1000BASE-EX
1310
SMF
-**
-
40,000 (131,234 ft)
1000BASE-ZX
1550
SMF
-
-
Approximately 70 km depending on link loss
 
* A mode-conditioning patch cord, as specified by the IEEE standard, is required regardless of the span length. Note how the mode conditioning patch cord for 62.5-μm fibers has a different specification from the mode-conditioning patch cord for 50-μm fibers.
 
Product specifications
 
Data Sheet Pdf